About 357,000 results
Open links in new tab
 
  1.  
  2. To create a DIY tape dispenser, follow these steps:
    1. Design and measure the dispenser.
    2. Cut the wood or plywood according to your measurements.
    3. Prepare the dowel.
    4. Drill holes for the dowel.
    5. Attach the sides to the base.
    6. Insert the dowel.
    7. Attach the hacksaw blade.
    8. Add finishing touches12.
    Learn more:

    How to Make an Easy to Use Tape Dispenser

    • Step 1: Parts You Need to Make This There are 5 pieces of wood used in this project. ...
    • Step 2: Drill Holes in Wood Pieces ...
    • Step 3: Attach Hacksaw Blade to Cutting Block ...

    How to Make an Easy to Use Tape Dispe…

    www.instructables.com/How-to-Make-an-Easy-to-u…

    Instructions

    • Step 1: Design and Measure Start by designing your tape dispenser. ...
    • Step 2: Cut the Wood Using the saw, cut the timber or plywood according to your measurements. ...

    More items

    Handy Multiple Roll Tape Dispenser: Che…

    project.theownerbuildernetwork.co/2017/01/20/org…
     
  3. People also ask
    How do you use a tape dispenser?
    To use a tape dispenser, place it flat with the metal section facing downwards. Position the reel of tape over the large wheel and press it firmly into place, ensuring that the beginning edge of the tape is situated to the left hand side of the tape/dispenser wheel and the sticky side of the tape is facing outwards.

    FAQs | Rapesco Office Products PLC

    rapesco.com
    How do you use a correction tape dispenser?
    To use a correction tape dispenser, simply hold it with your thumb in the groove, position the tip flat on your paper, press down firmly, and gently move from left to right. This film-based correction tape is more tear resistant than paper-based tape, offering greater strength to create tidy, inconspicuous corrections that last.

    BIC® Wite-Out® Brand EZ Correct™ Correction Tape, 4/Pack

    staples.com
    How to make a tape holder?
    Insert a long screwdriver through the center hole of the disk. Place the tip of the screwdriver on the cross that determines the center. Now just lower the disk, and voila, they are perfectly in the right place. Now we can continue cutting the rest of the pieces we need. For this, we use MDF 18mm (0.71″) so that we can make a solid tape holder.

    How to make a better tape holder - Christofix

    christofix.com
    How do you remove a packing tape dispenser?
    Lay your packing tape dispenser flat on a table with the wheel facing up. Then, hold down the dispenser with one hand and use your other to grab the underside of the tape. Simply pull up on the tape to remove it from the wheel. For dispensers without a handle: Look for the thin plastic clasp inside the roll.

    How to Load a Packing Tape Dispenser: Simple Tutorial - wikiHow

    wikihow.com
    How many discs do I need for a tape holder?
    We need 2 discs per tape holder. Depending on how many tape holders you want to make for your project, multiply the 2 disks by the number of tape holders you want. We will now connect the 2 disks together. We will do this by applying wood glue between the two discs.

    How to make a better tape holder - Christofix

    christofix.com
    What dimensions do I need for a tape holder?
    The dimensions we need are on the free plans, but I will list them below. Per tape holder you will need the following pieces : The 18mm (0.71″) parts we just cut can now be attached to the side. Apply glue to the joints and hold in place with nails. Now that the body is ready, the edges can be trimmed.

    How to make a better tape holder - Christofix

    christofix.com
    Feedback
     
  4. YouTube
    https://www.youtube.com/watch?v=Jgz_K0q47A0

    How to Make a Tape Dispenser - Very Easy - YouTube

     
  5. YouTube
    https://www.youtube.com/watch?v=O19t7NAMk70

    I Made a Multi Roll Tape Dispenser from Scratch! - YouTube

  9. Some results have been removed